Product Description
Original Replacement CHINAMFG Drag Chain Cable Track 65718577 of Container Reach Stacker Spare Parts for Repair and Maintenance.
Item Specifics
Part Name: Drag Chain,Cable Track
Part No: 65718577
Compatable with: Sany
Market Type: Genuine
Genuine CHINAMFG Container Reach Stacker Spare Parts Drag Chain Cable Track 65718577
| Sany Port Machinery and Crane Spare Parts List |
Sany Port Machinery and Crane Spare Parts List
A2299 Plate Sealing
6057167 Pad liner sealiind Plate
6057148 Pad sealing Control valve
6057183 BODY Sheel torque converter
60138654 Pump Prefill
60138719 Valve adjusting Perefill pump
65710957 Relay
Rocker Switch
A2412 Switch Column
60191985 Switch Column
15719797 Cylinder Seal
6571549 AC Compressor
60143815 Joystick
1426571 Crankshaft Seal
168899 Oil Pump
65715663 Oil Level
168899 O Ring
168899 Cardboard Tube Engine Oil
168899 Gasket Oil Cooler
168899 O Ring
Pump Fuel Hand Pump
168899 Cardboard Tube
6 0571 404 Fuel Filter Assy
168899 Fuel Hose
168899b01 Fuel Pump Assy With Support &gear
21798446 Fuel Pump Support
60267980 O Ring
61017873 Injector With Caliberation
168899 Turbocharger Low Rating
168899 Hose Clamp
60344726 Relay
168899 Coolant Pump
65715538 Alternator
Starter Motor
61017872 Boost Pressure Temp. Sensor
65715685 Pressure Sensor
168899 Flange Screw
60267753 Temperature Sensor
65715684 Pressure Sensor
60267752 Speed Sensor
65715682 Pressure Sensor
60132389 O Ring
60267751 Temperature Sensor
65715683 Pressure Sensor
A2299 Engine Fan Belt
B2299 Outlet Air Conditioner Vent Cover
60191986, Armrest Overturning Cylinder Lower Bracket
60134976 Pin
60134799 Spring
6 Wiring Harness
22296415 Fuel Filter with O Ring
21538975 Fuel Filter Water Spearator
13852940 Outlet
6056.066 Joystick
2215712, 2215711 Lock Hook
60199876 Cltuch Booster
A81571571035 Pressure Plate,Rear Spring,Suspension
A215711 Bracket,Thrust Rod,Suspension
11 0571 1 Wire,Steel,Suspension
A82571711 Block,Bumper,Suspension
10490661 Plate,Pressure,Bumper,Block,Suspension
A Bolt,Couple Tie,Suspension
10136396 Beam
Bolt Clamp,Spring Gp Rear
Tube,Sleeve,Clip,Spring Gp Rear
Nut,Clamp,Spring Gp Rear
10136395 Rocker Beam,Beam Gp
A81571571571 Seat, Center
A215711 Ring, Dust Proof
A Bolt
A Cover,End,Center Shaft,Suspension Gp
A Power Steering Pump
| Container Reach Stacker Parts |
Power System
Engine Transmission Assembly, Turbine Shaft, Hub Assembly, Transmission Plate Assembly, Pump Transmission Assembly, Front Wheel Drive, Transmission Gear Set, Clutch Shaft Assembly, Electric Control Valve Assembly, Handling Cover Assembly, Pressure Regulating Valve, Chongye Pump, Control Valve box cover assembly, electronic control valve assembly, double filter, fuel assembly, cooling assembly, intake assembly, air filter, intake pipe bracket, exhaust assembly, muffler
Frame Assembly
Fixed weight system, fender, cover, rearview mirror assembly, wind deflector assembly, cover assembly
Front window wiper assembly, rear window wiper assembly
double pedal
Air Conditioning System
Boom Assembly
Pitching cylinder, lower slider assembly, upper slider assembly, damping cylinder, telescopic cylinder assembly
Spreader Body
Right telescopic beam assembly, twist lock mechanism, ejector rod device, twist lock device, push rod assembly, slider seat assembly, lubricating oil pipeline assembly, reducer, main beam assembly, telescopic cylinder, hydraulic system, one-way Valve, Rotary Valve, Solenoid Reversing Valve, Telescopic Lock Valve Group
| Company Profile |
HangZhou CHINAMFG Technology Equipment Co., Ltd is a high-tech enterprise that integrates scientific research, design, production and sales. The company has strong technical force, advanced production technology, complete facilities, and has several senior technical engineers, constantly introducing more high-tech products suitable for market needs, which have good functional effect, and great market competitiveness.
In the process of development, the company continuously exchanges and cooperates with many domestic scientific research institutions. The ability to design, produce, maintain, debug and transform projects has rapidly increased, and the scale has continued to expand.
The company’s aim is to provide customers with quality and cheap products, and provide considerate service. In order to meet different needs, we supply high-quality products for the industrial-grade market and provides regular-quality products for professional-level markets and users. As a professional manufacturer, we independently researches and develops a variety of professional production equipments that are suitable for the characteristics of its products. At the same time, we can also customize them according to your requirements.
| Packing and Shipping |
We supply CHINAMFG / Konecranes / CHINAMFG / Fantuzzi / CVS port machinery empty container reach stacker spare parts.
If you need these,please contact us.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Spare Parts Warranty |
|---|---|
| Warranty: | Spare Parts Warranty |
| Type: | Drag Chain |
| Application: | Hoisting Machinery |
| Part Name 1: | Drag Chain |
| Part Number: | 60228577 |
| Customization: | Available | Customized Request |
|---|
Can drag chains be used in cleanroom environments for sensitive industries?
Yes, drag chains can be used in cleanroom environments for sensitive industries. Cleanrooms are controlled environments that are designed to minimize the presence of airborne particles, dust, and other contaminants. These environments are commonly found in industries such as semiconductor manufacturing, pharmaceuticals, biotechnology, aerospace, and electronics, where even the smallest particles can have a significant impact on product quality and performance.
When using drag chains in cleanroom settings, it is crucial to select drag chains that are specifically designed for such environments. Here are some considerations:
- Particle Emissions: Drag chains used in cleanroom environments should have low particle emissions to prevent contamination. Drag chains made from materials like stainless steel or self-lubricating polymers are often preferred as they generate fewer particles during movement.
- Smooth and Sealed Design: The drag chain design should be smooth and free of crevices or pockets where particles could accumulate. Sealed or closed designs are preferred to prevent the ingress or egress of particles.
- Easy Cleaning and Maintenance: Drag chains should be easy to clean and maintain to minimize the risk of particle accumulation over time. Regular cleaning and maintenance procedures are essential to uphold the cleanroom’s integrity.
- Chemical Resistance: Depending on the industry, drag chains may be exposed to various cleaning agents and chemicals. The chosen drag chain material should be resistant to these substances to maintain its integrity and prevent contamination.
By using drag chains specifically designed for cleanroom environments, industries can ensure that their sensitive manufacturing processes are protected from particle contamination. Regular inspection, cleaning, and maintenance of the drag chains will help maintain the cleanroom’s required cleanliness levels and prevent any potential issues that could impact product quality.
What are the limitations of using drag chains in certain applications?
While drag chains offer numerous advantages in cable management and protection, they also have certain limitations that need to be considered when selecting and using them in specific applications. Here are some limitations:
1. Limited Flexibility:
Drag chains are designed to move in a linear or slightly curved path. They may not be suitable for applications that require high flexibility or intricate routing of cables in multiple directions.
2. Size and Space Constraints:
For applications with limited space, finding the right-sized drag chain that can accommodate all the necessary cables and hoses without causing overcrowding can be a challenge.
3. Weight Restrictions:
Heavy-duty drag chains can handle significant loads, but there are weight limits for each type and size of chain. Exceeding these limits can lead to premature wear and reduced performance.
4. Noise and Vibration:
In high-speed or dynamic applications, the movement of drag chains can generate noise and vibration, which might affect the overall system performance or require additional noise-damping measures.
5. Maintenance:
While drag chains reduce cable wear and maintenance needs, they still require regular inspection and maintenance to ensure they function optimally. Neglecting maintenance can lead to unexpected failures.
6. Temperature Limits:
Some drag chains have temperature limitations. High-temperature environments can cause drag chains to degrade or lose their structural integrity, impacting their performance and lifespan.
7. Chemical Resistance:
Exposure to certain chemicals can deteriorate the material of the drag chain. Selecting the appropriate material with chemical resistance is crucial in chemical or corrosive environments.
8. Environmental Exposure:
In outdoor applications, drag chains are exposed to weather conditions such as rain, snow, and UV radiation, which can affect their durability over time.
9. Cost:
Drag chains can be more expensive compared to other cable management solutions. The initial investment should be weighed against the benefits they provide.
10. Compatibility:
Ensuring compatibility between the drag chain, cables, and hoses is essential to prevent friction, abrasion, or damage to the cables.
Despite these limitations, drag chains remain highly versatile and widely used in various industrial applications for cable management and protection.
What materials are drag chains typically made of to ensure durability?
Drag chains are typically made of various materials that are carefully chosen to ensure durability and longevity in industrial applications. The choice of materials depends on factors such as the application’s environment, load capacity requirements, and the type of cables or hoses they will be carrying. Some common materials used in drag chain construction include:
1. Plastic (Polymer): High-quality engineering plastics, such as nylon, polypropylene, or polyethylene, are commonly used for lightweight and low-cost drag chains. These plastic chains offer excellent resistance to corrosion, chemicals, and moisture, making them suitable for a wide range of industrial environments.
2. Steel: Drag chains made of steel are known for their high strength and durability, making them ideal for heavy-duty applications and environments with high impact or abrasive conditions. Steel chains are capable of carrying heavy loads and provide superior protection for cables and hoses.
3. Stainless Steel: For applications requiring additional resistance to corrosion and chemicals, stainless steel drag chains are preferred. They are especially useful in industries where exposure to harsh environments or frequent washdowns is common, such as food processing, pharmaceuticals, and outdoor applications.
4. Aluminum: Aluminum drag chains offer a lightweight alternative to steel while still providing sufficient strength for many industrial applications. They are often used in applications where weight reduction is essential, such as in robotics and automation systems.
5. Hybrid Chains: Some drag chains feature hybrid designs, combining multiple materials to optimize performance. For example, a drag chain might have a plastic body with reinforced steel or stainless steel links for added strength and rigidity.
Overall, the choice of material for a drag chain depends on the specific requirements of the application, including the load capacity, environmental conditions, and the need for resistance to corrosion, chemicals, and other external factors. By selecting the appropriate material, drag chains can ensure durability and reliable cable protection in a wide range of industrial settings.
editor by CX 2024-04-12
